服务热线：手机号码：19121166298
地 址：上海市北京东路668号科技京城东楼27楼C1室
BALLUFF微脉冲位移传感器选型
更新时间：2017-05-03 点击次数：846次
概览
型材结构
杆式结构
在恶劣环境下测量长位移的。
微脉冲位移传感器型材结构应用示例
插接器与连接导线 微脉冲位移传感器 自由式或引导式位置传感器
微脉冲位移传感器杆式结构应用示例
插接器与连接导线 微脉冲位移传感器 位置传感器，浮子
如需在恶劣环境下对长位移进行*与 可靠的测量，则应采用微脉冲位移 传感器。其高精度输出信号作为信号， 能通过各个不同的接口提供给控制系统。 其非接触式作用原理能够保证 无磨损。
优势
高分辨率、高重复性和高线性
抗震动、抗干扰场
应用
探测液压驱动装置 (如风力发电设备) 的 活塞位置
监测注塑机或加工中心内的 线性运动
监控配料及混合单元内的料位
微脉冲位移传感器 - 贴合 您的要求
Keyfeatures
| Connection | Connector, M12 |
|---|---|
| Multi-magnet technology | yes |
| Operating voltage | 10...30 V DC |
| For dynamic loop applications | No |
| Interface | Analog interface, current |
| Design | Series Profile |
| Approvals | CE, cURus |
General attributes
| Short-circuit protected | to GND and to 36 V DC |
|---|---|
| Enclosure Type per IEC 60529 | IP67 (with connector) |
| Protected against polarity reversal | Up to 36 V |
| No of magnets, factory setting | 1 |
| Trade name | Micropulse® |
Electrical attributes
| Connection type | Connector |
|---|---|
| Output signal | 4…20 mA and 20…4 mA |
| Galvanic isolation | No |
| Interface | Analog |
| Ripple | 0.5 Vpp |
| Current consumption (at 24 V DC) | ≤ 180 mA |
| Inrush current | ≤ 500 mA / 10 ms |
| Overvoltage protected | Up to 36 V |
| Voltage-proof (GND – housing) | 500 V AC |
| Output signal adjustable | With software tool |
| For dynamic loop applications | No |
| Number of magnets max. | 2 |
| Programming inputs | for USB configuration box |
| Interface | Analog interface, current |
| Error signal Ia rising | 3.6 mA |
| Error signal Ia falling | 3.6 mA |
| Operating voltage | 10...30 V DC |
Mechanical attributes
| Connector type | M12 |
|---|---|
| Ambient temperature Ta min. | -40 °C |
| Ambient temperature Ta max. | 85 °C |
| Housing material | Anodized aluminum |
| Number of pins | 8 |
| Version | Type P |
| Mounting type | Mounting clamps |
| Nominal stroke | 150 mm |
| Repeat accuracy | ±5 µm |
| TK, typ. (at 50% of 500 mm) | ≤ 30 ppm/K |
| Storage temperature min. | -40 °C |
| Storage temperature max. | 100 °C |
| Relative humidity | < 90 %, non-condensing |
| EN 60068-2-27 (shock) | 150 g / 6 ms |
| EN 60068-2-29 (cont. shock) | 150 g / 2 ms |
| EN 60068-2-6 (vibration) | 20 g, 10…2000 Hz |
| EN 60068-2-64 (noise) | 20 g, 10…2000 HZ |
| EN 55016-2-3 (emission) | Indust. and residential area |
| EN 61000-4-2 (ESD) | Severity Level 3 |
| EN 61000-4-3 (RFI) | Severity Level 3 |
| EN 61000-4-4 (burst) | Severity Level 3 |
| EN 61000-4-5 (surge) | Severity Level 2 |
| EN 61000-4-6 (HF fields) | Severity Level 3 |
| EN 61000-4-8 (magnetic fields) | Severity Level 4 |
| Cable/connector out | Axial |
| Null point | 72 mm |
