服务热线：手机号码：19121166298
地 址：上海市北京东路668号科技京城东楼27楼C1室
BALLUFF磁敏传感器BMF00CA
更新时间：2017-05-03 点击次数：651次
概览
组件
磁敏传感器应用示例
插接器与连接导线 磁敏传感器 附件
与感应式传感器相比，相同尺寸的磁性 传感器能提供更大的开关距离。有色金属壁 和铝壁不会影响其开关性能。这种 耐振型传感器可以安装在侧面或 正面使用。其磁体能齐平安装在钢质材料中 并感应南北极。 我们的磁敏传感器可针对 每种 缸体类型提供*的传感器型号。主要 应用范围：查询气动缸和液压缸 的活塞位置。
优势
广泛适用
精度*，开关性能可靠
采用非接触、无磨损的运行方式，保障较长的使用寿命
由于结构尺寸小而节省安装空间
磁敏传感器 - 贴合您的要求
Keyfeatures
| Connection | Cable with connector, M08x1-S75, 0,3m, PUR |
|---|---|
| Output function | PNP, Normally open (NO) |
| Series | BMF 235 |
| Special properties | Miniature |
| Cylinder housing | T-slot |
General attributes
| Utilisation category | DC 13 |
|---|---|
| Switching freq. f max. | 3000 Hz |
| Basic standard | IEC 60947-5-2 |
| Function indicator | yes |
| Short-circuit protected | yes |
| Enclosure Type per IEC 60529 | IP67 |
| Recommended connector | BKS-S 74,BKS-S 75 |
| Protected against polarity reversal | yes |
| Protected against miswiring | no |
| Scope of delivery | Cable clip for T-slot |
| Additional text | 2) Application area: pneumatic cylinder with t-slot. For dimensions, see sketch in product view. 4) Hex key size 2.0 mm: Max. tightening torque 0.4 Nm. Screwdriver 4x0.8 mm: Max. tightening torque 1 Nm - Rated operating current Ie for thermally coupled installation in metal. 3) Damping magnet, axially magnetized |
| Series | BMF 235 |
| Special properties | Miniature |
| Trade name | Global |
Electrical attributes
| Connection type | Cable with connector |
|---|---|
| Output resistance Ra | Open drain |
| Rated operating voltage Ue DC | 24,0 V |
| Effective operating current Ie | 200 mA |
| Rated insulation voltage Ui | 75 DC |
| Rated short circuit current | 100 A |
| Electrical version | DC, direct current |
| Load capacitance max. (at Ue) | 1 µF |
| No-load current Io damped max. | 6 mA |
| Max. no-load cur. Io undamped | 3 mA |
| Off-state current Ir max. | 80 µA |
| Ripple max. (% of Ue) | 15 |
| Switching output | PNP |
| Switching function | Normally open (NO) |
| Voltage drop static max. | 2,5 V |
| Turn-off delay toff max. | 0,10 ms |
| Turn-on delay ton max. | 0,10 ms |
| Rated switching field strength | 1,2 kA/m |
| Assured switching field streng | 2 kA/m |
| Connection | Cable with connector, M08x1-S75, 0,3m, PUR |
| Operating voltage | 10...30 V DC |
Mechanical attributes
| Tightening torque | 0.4 Nm |
|---|---|
| Cable short designation | Li12Y11Y-O |
| Cable length | 0,3 m |
| Connector type | M08x1-S75 |
| Height (small side) | 5 mm |
| Depth | 5,5 mm |
| Width of switching area | 23,5 mm |
| Shock rating | Shock, half-sinus, 30 gn, 11ms |
| Vibration rating | 55 Hz, 1 mm ampl., 3x30 min |
| Ambient temperature Ta min. | -25 °C |
| Ambient temperature Ta max. | 85 °C |
| Degree of contamination | 3 |
| Sensing surface material | PU |
| Housing material | PA 12 |
| Cable jacket material | PUR |
| Cable diameter D max. | 2,5 |
| Temperature drift max. % of Hn | 0,3 % |
