下载德国威格勒WEIGEL光电传感器型号ODX202P0007 Fiber Optic Cable Sensor ODX202P0007 - External Teach-In
- Key Potentiometer, Teach-In
- Large Detection and Working Range
- Recognition of Transparent Objects
- Reflex and barrier operation mode are possible
wenglor Fiber Optic Cables can be connected to this sensor. The easy to use Teach-In function allows for fine sensor adjustment, so that even transparent objects can be reliably recognized in barrier mode operation. Scanning width is automatically adapted to each individual application via external Teach-In. The devices can be easily mounted to standard DIN rails. Optical Data | Switching Hysteresis | < 15 % | | Light Source | Red Light | | Wave Length | 660 nm | | Service Life （T = +25 °C） | 100000 h | | Max. Ambient Light | 10000 Lux | Electrical Data | Supply Voltage | 10...30 V DC | | Current Consumption （Ub = 24 V） | < 40 mA | | Switching Frequency | 2 kHz | | Response Time | 250 µs | | On-/Off-Delay | 0...200 ms | | Temperature Drift | < 10 % | | Temperature Range | -25...60 °C | | Switching Output Voltage Drop | < 2,5 V | | Switching Output / Switching Current | 200 mA | | Short Circuit Protection | yes | | Reverse Polarity Protection | yes | | Overload Protection | yes | | Teach Mode | NT,MT,ZT,DT,TP | | Protection Class | III | Mechanical Data | Adjustment | Teach-In | | Housing Material | Plastic | | Full Encapsulation | yes | | Degree of Protection | IP65 | | Connection | M8 × 1; 4-pin | | DIN-Rail mounting | 35 mm | Output | Configurable as PNP/NPN | yes | | NO/NC switchable | yes | Ctrl.Panel - 01 = Switching Status Indicator
- 02 = Contamination Warning
- 07 = Selector Switch
- 24 = Plus Button
- 25 = Minus Button
Dimensioned Picture All dimensions in mm （1 mm = 0.03937 Inch） - 1 = Transmitter Diode
- 2 = Receiver Diode
|
服务热线：
