服务热线：手机号码：19121166298
地 址：上海市北京东路668号科技京城东楼27楼C1室
美国DYTRAN产品 / 电子器件 / 动力单元
更新时间：2015-08-10 点击次数：700次
| Electronics | 电子器件 | ||
| Power Units | 动力单元 | ||
| Standard line-operated current source power units are designed for 115V, 60 Hz operation. | 标准线操作电源单元115V, 60 Hz. | ||
| 402 | TEDS adapter, IEEE 1451.4 compatible, BNC jack input / BNC plut output | 402 | TEDS 适配器, IEEE 1451.4 兼容, BNC 输入插孔 / BNC 普卢特输出 |
| 4007 | One logical output, 4 channel, AC and RMS DC outputs, 3 kHz and 10 kHz low pass filter options | 4007 | 1 逻辑输出, 4 通道, AC 和 RMS DC 输出, 3 kHz 和 10 kHz 低通滤波器选择 |
| 4102C | Battery powered, 2 mA constant current, single channel, BNC connectors | 4102C | 电池供电, 2 mA 恒流, 单通道, BNC 连接器 |
| 4103C | Battery powered, 2 mA constant current, 3 channel, BNC connectors | 4103C | 电池供电, 2 mA 恒流, 3 通道, BNC 连接器 |
| 4105C | Battery powered, with gain x1, x10, x100, single channel, BNC connectors | 4105C | 电池供电, 增益 x1, x10, x100, 单通道, BNC 连接器 |
| 4110C | Line powered, 2 mA, adjustable current, with zero clamp, BNC connectors | 4110C | 线路供电, 2 mA, 可调电流, 0夹钳, BNC 连接器 |
| 4112B | Line powered, with gain x1, x10, x100, buffered output, BNC connectors | 4112B | 线路供电, 增益 x1, x10, x100, 缓冲输出, BNC 连接器 |
| 4113 | Line powered, unity gain, 3 channel (use with 4-pin connector triaxials, 3053B / 3093B) | 4113 | 线路供电, 单位增益, 3 通道 (使用4针三轴连接器, 3053B / 3093B) |
| 4114B1 | Line powered, 4 channel, 2-20 mA adjustable current, BNC connectors | 4114B1 | 线路供电, 4 通道, 2-20 mA 可调电流, BNC 连接器 |
| 4115B | Line powered, adjustable current, AC/DC coupled, buffered output, zero adjustable | 4115B | 线路供电, 可调电流, AC/DC 连结, 缓冲输出, 可调零 |
| 4116 | Line powered, 16 channel, unity gain, front panel current adjust | 4116 | 线路供电, 16 通道, 单位增益, 前面板通用校正 |
| 4119B | Line powered, single channel, for use with 3120BK system | 4119B | 线路供电, 单通道, 3120BK 系统使用 |
| 4120 | channel rack, 19" wide x 1 3/4 high, adjustable current, channel output monitor selector | 4120 | 通道架, 19" 宽 x 1 3/4 高, 可调电流, 通道输出监视器选择 |
| 4121 | 2 channel rack, 19" wide x 1 3/4 high, adjustable current, monitor meter, channel output monitor selector | 4121 | 2 通道架, 19" 宽 x 1 3/4 高, 可调电流, 监测仪, 通道输出监视器选择 |
| 4122B | channel rack with gain x1, x10, x100, 19" wide x 1 3/4 high, buffered output | 4122B | 通道架 增益 x1, x10, x100, 19" 宽 x 1 3/4 高, 缓冲输出 |
| 4123B | 2 channel rack with gain x1, x10, x100, 19" wide x 1 3/4 high, buffered output | 4123B | 2 通道架 增益 x1, x10, x100, 19" 宽 x 1 3/4 高, 缓冲输出 |
| 4129 | 6 channel, true RMS to DC converter, 10 Volts DC out full scale, for 100 mV/g accelerometers | 4129 | 6 通道, 真RMS 到 DC 转换器, 10V DC 全范围输出, 100 mV/g 加速度计 |
| 4129M1 | 6 channel, true RMS to DC converter, 10 Volts DC out full scale, for 10 mV/g accelerometers | 4129M1 | 6 通道, 真RMS 到 DC 转换器, 10V DC 全范围输出, 10 mV/g 加速度计 |
| 4130 | 12 channel, true RMS to DC converter, 10 Volts DC out full sclae, for 100 mV/g accelerometers | 4130 | 12 通道, 真RMS 到 DC 转换器, 10V DC 全范围输出, 100 mV/g 加速度计 |
| 4130M2 | 12 channel, true RMS to DC converter, 10 Volts DC out full sclae, for 10 mV/g accelerometers | 4130M2 | 12 通道, 真RMS 到 DC 转换器, 10V DC 全范围输出, 10 mV/g 加速度计 |
| 4139 | 6 channel, voltage mode signal conditioner, airborne, powered from +28 VDC power | 4139 | 6 通道, 电压模式信号调理, 机载, +28 VDC 电源供电 |
| 4151HL | True RMS vibration monitor / controller, analog front display, high set point | 4151HL | 真RMS 振动监测仪/控制器, 模拟前端展示, 高设置点 |
| 4151M13 | True RMS vibration monitor / controller, analog front display, with 2 kHz / 5 kHz LP filter | 4151M13 | 真RMS 振动监测仪/控制器, 模拟前端展示, 2 kHz / 5 kHz LP 滤波器 |
| 4177 | Vibration meter, hand held, acceleration, velocity, displacement, digital readout | 4177 | 振动计, 手持, 加速, 高速, 置换, 数字读出 |
| 4190 | Vibration meter, hand held, for accelerometer performance validation | 4190 | 振动计, 手持, 加速性能验证 |
| 4200 | ack adapter for "R version power units and vibration meters | 4200 | "R" 版本动力装置及振荡计的机架适配器 |
| 4515 | Sensor simulator for calibrator of IEPE power units | 4515 | IEPE 动力单元校准器传感器模拟器 |
