上海申思特自动化设备有限公司

HYDAC贺德克压力开关EDS 4300  英文描述：

Available versions:
Standard; ATEX
The programmable electronic pressure switch of the series EDS 4300 was specially developed in order to combine the advantages of a compact, robust and inexpensive device with the virtues of a programmable pressure switch. The EDS 4300 can be programmed conveniently and simply with the HPG 3000 programming device. If the connection between the programming device and the EDS 4300 is separated, then all of the settings will remain in effect in the pressure switch. This prevents the possibility of unauthorised or incorrect modification of the settings being made. The following parameters can be modified: - Switchpoint - Hysteresis - Switching direction (closer / opener) - Switching delay times The EDS 4300 is suitable for low-pressure applications (up to 16 bar) and is equipped with a pressure measurement cell with thick-layer DMS on a ceramic diaphragm. In comparison with the customer-specific permanently set pressure switches, the programmable EDS 4300 reduces the number of variants, which has a positive effect in terms of warehouse storage.
Choice between 1 or 2 switch outputs
Choice between PNP or NPN switching outputs
High switching output performance
Accuracy ±1% FS
Free, inpidual programming
Compact and robust design
ATEX version also available for explosion-hazard areas.
Permanently adjusted versions also available for OEM applications

压力开关的概观（注：不是所有的特征可以自由地相互组合，请从相应的数据表的信息）